Table of Contents
Advertisement
Caller ID System Operation
5. When the setting you desire is displayed, press and hold the
the setting. A long beep will sound to confirm the setting has been saved.
6. Continue with programming or press
STANDBY mode.
NOTE: The standard and default flash time setting is 600msec. This is the setting
you should use to access standard telephone services such as call waiting. This
setting is adjustable to allow for PBX and other special uses.
H.
Changing the Pause Time
1. Press the
/func button to enter the menu.
2. Press the
8
button to go to the PAUSE TIME programming option.
tuv
3. Press the
button to change the setting. "2" will begin flashing.
4. Press the SCROLL UP
5. When the setting you desire is displayed, press and hold the
the setting. A long beep will sound to confirm the setting has been saved.
6. Continue with programming or press
STANDBY mode.
I.
Programming One-Touch Voice Mail Dialing
1. Press the
/func button to enter the menu.
2. Press the
9
button to go to the VOICE MAIL programming option.
wxy
3. Press the
button to enter the voice mail speed dial number.
4. Press the TELEPHONE KEYPAD
used to access your voice mail messages (up to 15 digits).
5. When the phone number you desire is displayed, press the
the setting. A long beep will sound to confirm the setting has been saved.
6. Continue with programming or press
STANDBY mode.
/func button to return to the
or DOWN
button to select the desired time delay..
/func button to return to the
1
~
buttons to enter the phone number
0
oper
/func button to return to the
25
button to save
save
button to save
save
save
button to save
Advertisement
Table of Contents
