Table of Contents
Advertisement
f.
Release the ZIF connector (1) to which the webcam/microphone module cable is connected, and then
disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
The webcam/microphone module is available using spare part number N09654-001.
The webcam/microphone module cable is available using spare part number N09651-001.
g.
Before replacing the webcam/microphone module, thoroughly clean all gasket adhesive residue from
the display panel assembly before installing a new gasket. Remove the protective backing from the
new gasket, align the holes (1) on the gasket with the pins (2) on the display panel assembly, and then
attach the gasket to the display panel assembly.
14.
If you need to remove the hinges:
a.
Remove the display bezel.
b.
Remove the display panel assembly.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
