Table of Contents
Advertisement
2.
Remove the solid-state drive top shield (2).
The solid-state drive top shield is not available as a spare part component.
3.
Thoroughly clean the thermal material from the surfaces of the solid-state drive and the solid-state drive
top shield each time the solid-state drive shield is removed. The solid-state drive thermal pad is available in
the Solid-State Drive Thermal Pad Kit, spare part number N09636-001. The following illustration shows the
replacement thermal material locations.
A thermal pad is used on the solid-state drive (1) and on the solid-state drive top shield area (2) that
services it.
4.
Lift the front edge of the solid-state drive (1) until it rests at an angle.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
