Table of Contents
Advertisement
g.
Remove the display panel cable, webcam/microphone module cable, and the wireless antenna cables
from the display hinges (4).
h.
Swing the top edge of the display panel assembly (1) up and forward until it rests upside down in front
of the display back cover.
i.
Release the adhesive support strip (2) that secures the display panel cable to the display panel.
j.
Release the retention bar (3) that secures the display panel cable to the display panel.
k.
Disconnect the display panel cable (4) from the display panel.
l.
Release the ZIF connector (5) to which the ambient light sensor module cable is connected, and then
disconnect the ambient light sensor module cable from the ambient light sensor module.
48
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
