Table of Contents
Advertisement
7.
Remove the six Phillips M2.5 × 5.6 screws that secure the display assembly to the computer.
8.
Swing the display hinges (1) up and back as far as they will go.
9.
Open the display assembly (2) to a 90-degree angle.
10.
Separate the computer (3) from the display assembly.
11.
If you need to remove the display panel assembly, display panel cable, or any of the internal display
components, follow these steps.
a.
Remove the display assembly.
b.
Position the display assembly with the panel facing down and the bottom edge of the assembly
toward you.
46
Chapter 5 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
