NordicTrack S22i User Manual page 11

8. Orient the Lower Console Cover (154) as shown
and press it onto the back of the Console (10).
Position the wires (not shown) in the indi-
cated notch (G).
Tip: Avoid pinching the wires. Orient the
Upper Console Cover (155) as shown and press
it onto the back of the Console (10).
9. IMPORTANT: Have a second person move the
Console (10) from side to side, if necessary,
so that it is level. While the second person
holds the Console still, firmly tighten the
M10 x 55mm Screw (94).
Next, orient the Hand Weight Tray (38) so
that the orientation sticker (H) is in the loca-
tion shown. Then, set the Hand Weight Tray on
the Console Support (8), and insert the small
post (not shown) on the underside of the Hand
Weight Tray into the hole (I) in the Console
Support.
Tip: Avoid pinching the wires (D, E). Attach
the Hand Weight Tray (38) to the Console
Support (8) with four #8 x 5/8" Screws (17); start
all the Screws, and then tighten them.
8
10
9
Avoid
pinching
the wires
(D, E)
38
94
D, E
11
155
G
154
Avoid pinching
the wires
10
H
8
I
17