Table of Contents
Advertisement
Quick Links
nordictrack.com
USER'S MANUAL
Model No. NTEX02117.1
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today,
go to my.nordictrack.com.
CUSTOMER CARE
For service at any time, go to
nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Keep this
manual for future reference.
Advertisement
Table of Contents
Related Manuals for NordicTrack NTEX02117.1
Summary of Contents for NordicTrack NTEX02117.1
- Page 1 USER’S MANUAL Model No. NTEX02117.1 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.nordictrack.com. CUSTOMER CARE For service at any time, go to nordictrackservice.com.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NORDICTRACK and IFIT are registered trademarks of ICON Health & Fitness, Inc. The BLUETOOTH word ® mark and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license. Google Maps is a trademark of Google LLC. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your studio cycle before using your studio cycle. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 15. The studio cycle should not be used by flywheel stops. Reduce your pedaling speed persons weighing more than 350 lbs. in a controlled way. (159 kg). 19. To stop the flywheel quickly, press the brake 16. Be careful when mounting and dismounting knob downward.
- Page 5 STANDARD SERVICE PLANS...
-
Page 6: Before You Begin
BEFORE YOU BEGIN Congratulations for selecting the revolutionary For your benefit, read this manual carefully before you use the studio cycle. If you have questions after NORDICTRACK COMMERCIAL S22I STUDIO ® CYCLE. The COMMERCIAL S22I STUDIO CYCLE is reading this manual, please see the front cover of this unlike any ordinary exercise bike. -
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 8: Assembly
• To avoid damaging parts, do not use power tools. Assembly may be easier if you have a set of wrenches. 1. Go to my.nordictrack.com on your computer and register your product. • documents your ownership • activates your warranty •... - Page 9 2. Attach the Front Stabilizer (3) to the Base (2) with four M10 x 20mm Screws (105); do not fully tighten the Screws yet. See the inset drawing. Finish attaching the Front Stabilizer (3) with two additional M10 x 20mm Screws (105). Then, fully tighten all six M10 x 20mm Screws (105).
- Page 10 3. Attach the Rear Stabilizer (4) to the Base (2) with four M10 x 20mm Screws (105); do not fully tighten the Screws yet. See the inset drawing. Finish attaching the Rear Stabilizer (4) with two additional M10 x 20mm Screws (105). Then, fully tighten all six M10 x 20mm Screws (105).
- Page 11 5. Insert the Handlebar (97) into the Handlebar Post (7). Attach the Handlebar with four M8 x 12mm Screws (93); start all the Screws, and then tighten them. 6. Tip: Avoid pinching the wires (C). Slide the Console Support (8) onto the Handlebar (97). Attach the Console Support (8) with an M10 x 52mm Bolt (94) and an M10 Jam Nut (95);...
- Page 12 7. Look under the Console Support (8) and identify the Upper Wire (123), which has a larger con- nector than the Extension Wire (124). Connect the Upper Wire (123) to the Lower Wire (122) extending from the Handlebar Post (7). Then, insert the connectors on both Wires into the Handlebar Post.
- Page 13 9. IMPORTANT: Have a second person move the Console (10) to a level position. While the second person holds the Console steady, firmly tighten the M10 x 52mm Bolt (94). Next, orient the Hand Weight Tray (38) so that Avoid the largest opening (E) is facing forward.
- Page 14 11. Note: You can attach your own saddle if desired. See inset drawing a. Tip the Saddle (54) to one side and slide one of the rails (F) as far as possible between the Lower Saddle Clamp (52) and the Upper Saddle Clamp (53). If necessary, further loosen the M8 Saddle Screw (41).
- Page 15 13. Set the two Hand Weights (14) in the Hand Weight Tray (38). IMPORTANT: Make sure not to hit the Console (10) with the Hand Weights (14) when you set the Hand Weights in the Hand Weight Tray (38) after each use. 14.
-
Page 16: How To Use The Studio Cycle
HOW TO USE THE STUDIO CYCLE HOW TO PLUG IN THE POWER CORD A temporary adapter may 2-pole Receptacle This product must be grounded. If it should mal- be used to function or break down, grounding provides a path of connect the Adapter least resistance for electric current to reduce the risk... - Page 17 FEATURES OF THE STUDIO CYCLE HOW TO ADJUST THE GEOMETRY OF THE STUDIO CYCLE Measuring Watts The studio cycle can be adjusted to match the geom- Each studio cycle is calibrated to measure your power etry of your road bike to promote correct form and to output and to allow you to monitor your watts and ensure proper training of the muscles.
- Page 18 How to Adjust the Saddle Post HOW TO LEVEL THE STUDIO CYCLE For effective training, the saddle should be at the If the studio cycle proper height. As you pedal, there should be a slight rocks slightly on bend in your knees when the pedals are in the lowest your floor during position.
- Page 19 CONSOLE DIAGRAM FEATURES OF THE CONSOLE When you use the manual mode of the console, you can change the resistance of the pedals and the incline The advanced console offers an array of features of the frame with the touch of a button. designed to make your workouts more effective and enjoyable.
- Page 20 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the studio cycle has been exposed The console features a tablet with a full-color touch to cold temperatures, allow it to warm to room tem- screen. The following information will help you use the perature before you turn on the power.
- Page 21 HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before you use the studio cycle for the first time, set up First, touch the profile button, touch Settings, touch Maintenance, and then touch Update. The the console. console will check for firmware updates. For more 1.
- Page 22 HOW TO USE THE MANUAL MODE If desired, adjust the volume level by pressing the volume increase and decrease buttons on the right 1. Touch the screen or press any button on the side of the console. console to turn on the console. To pause the workout, simply touch the screen See HOW TO TURN ON THE POWER on or stop pedaling.
- Page 23 HOW TO USE A MAP WORKOUT OR AN ONBOARD To draw your own map for a workout, see HOW TO WORKOUT CREATE A DRAW-YOUR-OWN-MAP WORKOUT on page 25. 1. Touch the screen or press any button on the console to turn on the console. When you select a workout, the screen will show an overview of the workout that includes details See HOW TO TURN ON THE POWER on...
- Page 24 If the resistance level and/or incline level is too high When the workout comes to an end, a workout or too low, you can manually override the setting summary will appear on the screen. If desired, you by pressing the Resistance buttons or the Incline/ can publish your results using one of the options on Decline buttons.
- Page 25 HOW TO CREATE A DRAW-YOUR-OWN-MAP If you make a mistake, touch Undo on the left side WORKOUT of the screen. 1. Touch the screen or press any button on the The screen will display the elevation and distance console to turn on the console. statistics for your workout.
- Page 26 HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout that you have previously added to your schedule on iFit.com. To use an iFit workout, the console must be connected IMPORTANT: Before iFit workouts will load, you to a wireless network (see HOW TO CONNECT TO A must add them to your schedule on iFit.com WIRELESS NETWORK on page 28).
- Page 27 HOW TO CHANGE CONSOLE SETTINGS 3. View the console tour presentation. IMPORTANT: Some of the settings and features To view a tour presentation that will guide you described may not be enabled. Occasionally, a through the features of the console, touch How It firmware update may cause your console to function Works.
- Page 28 7. Calibrate the incline system. 4. Set up and manage a wireless network connection. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The When Wi-Fi is enabled, the screen will show a frame will automatically rise to the maximum incline list of available networks.
- Page 29 HOW TO USE THE SOUND SYSTEM THE OPTIONAL CHEST HEART RATE MONITOR To play music or audio books through the console Whether your sound system while you exercise, plug a 3.5 mm male goal is to to 3.5 mm male audio cable (not included) into the burn fat or to jack on the right side of the console and into a jack on strengthen your...
-
Page 30: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 31: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE INCLINE SYSTEM TROUBLESHOOTING Regular maintenance is important for optimal If the frame does not move to the correct incline level, performance and to reduce wear. Inspect and properly see HOW TO CHANGE CONSOLE SETTINGS on tighten all parts each time the studio cycle is used. page 27 and calibrate the incline system. - Page 32 HOW TO ADJUST THE REED SWITCH Then, carefully pull the tops of the Right and Left Shields (30, 32) apart a few inches. If the console does not display correct feedback, the See the inset drawing. Slightly loosen the two indi- reed switch should be adjusted.
- Page 33 HOW TO ADJUST THE DRIVE BELT If you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest setting, the drive belt may need to be adjusted. To adjust the drive belt, first unplug the power cord. Then, follow the instructions below.
-
Page 34: Exercise Guidelines
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian. - Page 35 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch; never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
-
Page 36: Part List
PART LIST Model No. NTEX02117.1 R0718A Key No. Qty. Description Key No. Qty. Description Frame Resistance Disc Base Lower Saddle Clamp Front Stabilizer Upper Saddle Clamp Rear Stabilizer Saddle M6 Shoulder Screw Anchored Zip Tie Pivot Clamp Pedal Set Handlebar Post... - Page 37 Key No. Qty. Description Key No. Qty. Description Carriage Knob M5 Nut M4 x 12mm Machine Screw M5 x 8mm Screw M4 x 10mm Screw M3 x 8mm Screw M10 Clamp Screw Adjustment Block M10 x 20mm Screw M4 x 10mm Blunt Screw M8 x 85mm Bolt M3 x 20mm Screw M4 x 14mm Machine Screw...
-
Page 38: Exploded Drawing
EXPLODED DRAWING A Model No. NTEX02117.1 R0718A 86 57... - Page 39 EXPLODED DRAWING B Model No. NTEX02117.1 R0718A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...