Foxconn 661GX7MJ Series Manual page 49

vPower Up by Alarm
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.
vMonth Alarm
This option is used to set the timing for the start-up month. The setting values
contain 0 - 12 and NA.
vDay of Month Alarm
This option is used to set the timing for the start-up day of the month. The setting
values contain 0 - 31.
vTime (hh:mm:ss) Alarm
This option is used to set the timing for the start-up time. The setting values
contain hh:0 – 23; mm:0 – 59; ss:0 – 59.
vPrimary/Secondary IDE
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels.
vFDD, COM,LPT Port
W hen this option is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial ports, or
the parallel port.
vPCI PIRQ [A-D]#
W hen this option is disabled, any PCI device set as the master will not power
on the system.
42
Chapter 3 BIOS Description