Table of Contents
Advertisement
BIOS TBL ENABLE Jumper:TBL_EN
The system cannot boot, if the BIOS failed to be
flashed in conventional flash BIOS process. You
will have no such worry when using the BIOS TBL
function, which is used to protect BIOS "Top Boot
Block". By using this function, the system still can
boot even if the flash BIOS fails and show some
information to recover the BIOS. To utilize this
function, you just leave this jumper as short pin 2
and 3 with the jumper cap.
LPC Connector: FWH/LPC_CON(optional)
This motherboard provides an LPC connector. This
connector is used to flash the LPC BIOS. Connect
one side of a cable to the connector, then attach the
BIOS Flash Card to the other side of the cable.
SPI Connector: SPI_CON(optional)
This motherboard provides an SPI connector. This
connector is used to flash the SPI BIOS. Connect
one side of a cable to the connector, then attach the
BIOS Flash Card to the other side of the cable.
Chapter 2
Installation Instructions
BIOS TBL
Disabled
BIOS TBL
Enabled
FW H/LPC_CON
SPI_CON
3
2
1
3
2
1
TBL_EN
2
1
14 13
1
2
7
8
19
Advertisement
Table of Contents
