Table of Contents
Advertisement
vCPU L2 Cache ECC Checking
This option is used to enable or disable CPU L2 cache ECC checking.
vFirst/Second/Third Boot Device
This option allows you to set the boot device's sequence.
vBoot Other Device
W ith this function set to enable, the system will to boot from some other
devices if the first/second/third boot devices failed.
vSwap Floppy Drive
If you have two floppy diskette drives in your system, this option allows you to
swap the assigned drive letters.
vBoot Up Floppy Seek
If this option is enabled, BIOS will activate the floppy drive during the system
boot and the drive's indicator will flash after the activation. The magnetic
head will move back and forth from A to B.
vBoot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your ystem
is started.
vGate A20 Option
This option is used to set up the A20 signal control necessary for access to
the 1MB memory.
vTypematic Rate Setting
If this option is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard.
vTypematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down key
generated.
vTypematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a held-
down key begins generating repeat characters.
28
Chapter 3
BIOS Description
Advertisement
Table of Contents
