Setting Hardware Passwords - HP Kayak XU04 User Manual

Setting Hardware Passwords

You can set two passwords, the Hardware Administrator (or
Supervisor) password and the Hardware User password, to provide two
levels of protection for your PC Workstation. You set both passwords
using the menu in the Setup program (refer to "The HP
Security
Summary Screen and Setup Program" on page 39).
Setting a Password
To set a Hardware Administrator or User password:
1 Start the Setup program (refer to "The HP Summary Screen and
Setup Program" on page 39).
2 Select the
Security
3 Select the
Administrator
4 Choose the
Set Administrator
asked to enter your password twice.
5 To save your changes and exit the Setup program press
, then
Exit Menu Exit Saving Changes
To remove the password, follow the same procedure as to set a
password. You will be asked to enter the existing password first. Then,
for the new password, leave the password field blank and press
. To confirm your choice, press
1 Setting Up and Using Your HP PC Workstation
menu.
or password submenu.
User
or
User password
.
Setting Hardware Passwords
setup item. You will be
or select
a second time.
English 13