Legal Notice - Crest Audio DM-NAX-8ZSA Quick Start Manual

DM-NAX-8ZSA
DM NAX™ 8-Zone Streaming Amplifier
Observe the LED Indicators
Refer to the following table for information about the LED indicators on
the device.
LED Indicator Color
PWR Amber
White
Red
LAN White
Off
NAX White
Off
SOURCE 1-8 White
Red
Off
ZONE 1-8 White
Red
Meaning
Power is being applied to the device.
The device is booting.
Device is powered on with audio
passing.
Device is in standby mode.
The device is powered on and has a
valid IP address.
Device is not connected to a network
or the IP address is invalid.
AoIP is ready to pass and the unit's
PTP clock is synced.
No AoIP is passing to or from and/or
PTP is not synced.
Signal is detected on the specified
input/source.
There is clipping on an analog input or
bitstream audio detected on a digital
input.
There is no signal detected on the
specified input/source.
There is audio output on the indicated
zone.
Clipping or a fault is detected on the
zone output due to over current, over
temperature, or low voltage.
LED Indicator Color
SETUP Solid Red
Blinking Red

Legal Notice

Use of the Works with Apple badge means that an accessory has been
designed to work specifically with the technology identified in the badge
and has been certified by the developer to meet Apple performance
standards.
Visit the Product Page
Scan the QR code to visit the product page.
DM-NAX-8ZSA
www.crestron.com/model/6510878
Quick Start
Meaning
The SETUP button is pressed.
A network reset or factory restore has
been initiated via the adjacent SETUP
button.
9