Connect The Device - Crest Audio DM-NAX-8ZSA Quick Start Manual

Dm nax™ 8-zone streaming amplifier
Table of Contents

Advertisement

DM-NAX-8ZSA
DM NAX™ 8-Zone Streaming Amplifier
Rack Mounting Safety Precautions
Elevated Operating Ambient Temperature: If installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient temperature.
Therefore, consideration should be given to installing the equipment in
an environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
Reduced Airflow: Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment
is not compromised.
Mechanical Loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven
mechanical loading.
Circuit Overloading: Consideration should be given to the connection of
the equipment to the supply circuit and the effect that overloading of
the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
Reliable Earthing: Reliable earthing of rack-mounted equipment should
be maintained. Particular attention should be given to supply
connections other than direct connections to the branch circuit (e.g., use
of power strips).

Connect the Device

Make the necessary connections as called out in the following
illustration. Connect power last.
CAUTION:
Keep the device unplugged until all of the input, network, output,
l
and speaker wiring is complete.
Check the speaker cables for shorts and frayed wiring around the
l
SPEAKER OUTPUTS connectors.
NOTE:
Ensure that the unit is properly grounded by connecting the
l
chassis ground lug to an earth ground (building steel).
To prevent overheating, do not operate this product in an area
l
that exceeds the environmental temperature range listed in the
product specifications.
Do not bundle power cords together with connection cables.
l
Doing so can result in noise.
Quick Start
3

Advertisement

Table of Contents
loading

Table of Contents