DM-NAX-8ZSA
DM NAX™ 8-Zone Streaming Amplifier
Install the Device
Refer to the
Safety Instructions
The device can be placed on a table or installed in a rack.
Place on a Table
Place the device on a table or stack on top of another device.
(Doc. 6607) prior to installation.
Rack Installation
This device occupies 2 RU of rack space.
To install the included rack ears:
1. Use a #1 Phillips screwdriver to remove the three screws from each
side of the front of the device as shown in the illustration.
2. Use the screwdriver and the six included 1/4 in. Phillips Pan Head
screws to attach the included rack ears to the device.
3. Mount the device into the rack using four rack mounting screws (not
included).
Quick Start
2