Configure The Device - Crest Audio DM-NAX-8ZSA Quick Start Manual

DM-NAX-8ZSA
DM NAX™ 8-Zone Streaming Amplifier
Bridged Wiring
Connect speaker outputs as shown in the following illustration to deliver
more power to the speakers (8 ohm speakers only).
NOTE:
Before wiring the speakers for bridging, ensure that the device is
l
configured for bridging using web UI, Crestron Home™ software,
or a Crestron SIMPL program running on a control system.
Bridging can only be done between a left and a right output
l
within the labeled zone.
Balanced/Unbalanced Audio Output
Refer to the following table and illustration for analog audio output pin
assignments and connection information.
Signal Name Balanced Audio Output
+ L+
- L−
G Shield/ground
+ R+
- R-

Configure the Device

For detailed information on configuring the device, refer to
Product Manual (Doc. 9045).
Quick Start
Unbalanced Audio Output
L+ Out
Open
Open
R+ Out
Open
DM NAX™
6