Crest Audio DM-NAX-8ZSA Quick Start Manual page 7

DM-NAX-8ZSA
DM NAX™ 8-Zone Streaming Amplifier
Apple® AirPlay® Setup
The DM-NAX-8ZSA supports AirPlay 2 and requires iOS 11.4 or later.
AirPlay can be enabled on any of the built-in media players on the DM-
NAX-8ZSA.
To stream media from an iOS device to a speaker zone in your
distributed audio system:
1. Ensure that the iOS device and DM-NAX-8ZSA are on the same
network.
2. On the DM-NAX-8ZSA, enable AirPlay for the built-in media player
you would like to stream to, either using the web UI or programming.
For more information, refer to the
9045).
NOTE: If the control/media and Audio-over-IP network traffic is
isolated between two network ports on the DM-NAX-8ZSA,
AirPlay will use the port specified for the Control/Media traffic.
3. On your iOS device:
a. Enable AirPlay
b. From the list of available AirPlay destinations, select the DM-
NAX-8ZSA zone you would like to stream to.
The media player will play back audio to the selected zone(s).
NOTE: By default, media players 1 - 8 route the audio signals to their
respectively numbered speaker zones 1 - 8. If the user has not
specified the speaker zone when Airplay streaming begins, the
media player will automatically route to its default speaker zone.
For example, the audio from the media player 5 will be routed to
speaker zone 5.
DM NAX™ Product Manual (Doc.
After the AirPlay streaming begins, you will be able to control the
volume of the streaming DM-NAX-8ZSA speaker zones directly from
your iOS device.
Quick Start
7