Windows Nt Workstation Password - Compaq Deskpro Workstation AP250 Maintenance And Service Manual

Clearing Passwords
The Compaq Deskpro Workstation AP250 is equipped with a Power-On
Password (P49) jumper on the system board to enable and disable the
Power-On Password. Installing the jumper will enable the Power-On Password
feature in setup, and removing the jumper will disable the Power-On
Password. See Figure 5-1 for the location of the jumper.
Figure 5-1. Power-On Password (P49) jumper

Windows NT Workstation Password

To establish a password in Windows NT Workstation:
1. Click Start, Programs, Administrative Tools.
2. Click User Manager, then follow the instructions to set a new password
for "new user."
Compaq Confidential – Need to Know Required
Writer: Bruce Sullivan Project: Compaq Deskpro Workstation AP250 Maintenance and Service Guide Comments:
Part Number: 118133-001 File Name: f-ch5 System Security.doc Last Saved On: 10/4/99 4:30 PM
System Security 5-5