Changing To An Ethernet Connection On The Printer's Control Panel; Changing The Wi-Fi Direct (Simple Ap) Settings - Epson Expression Premium XP-7100 Series User Manual

User's Guide
Network Settings
Changing to an Ethernet Connection on the Printer's
Control Panel
Follow the steps below to change from a wireless LAN connection to a wired LAN connection from the control
panel.
1. Tap Settings on the home screen.
2. Tap Network Settings > Wired LAN Setup.
3. Tap Start Setup.
4. Check the message, and then tap OK.
5. Connect the printer to the router with an Ethernet cable.

Changing the Wi-Fi Direct (Simple AP) Settings

When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from > Wi-Fi
Direct > Change Settings, and then the following menu items are displayed.
u d l r
To select an item, move the focus to the item using the buttons, and then press the OK button.
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the
control panel.
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
Change Password
Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set
the password in ASCII characters that is displayed on the software keyboard on the control panel.
When changing the password, all connected devices are disconnected. Use the new password if you want to re-
connect the device.
Disable Wi-Fi Direct
Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
The Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.
53