Table of Contents
Advertisement
4.
Select Maintenance > Firmware Upgrade.
5.
Click the Check button.
6.
If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note:
You might need to unzip the firmware file.
7.
Click the Browse button.
8.
Locate and select the new firmware file.
CAUTION:
After you click the Upload button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
9.
Click the Upload button.
The firmware update starts and the extender restarts. This process takes a couple of
minutes
View Wired and Wireless Network Devices
You can view the active wired and wireless devices in both the extender network and the
network to which the extender is connected. If you do not recognize a wireless device, it
might be an intruder.
To view devices on the network:
1.
On your computer, launch a web browser.
2.
In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.
Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.
N300 WiFi Range Extender
Monitor and Maintain the Extender
35
Advertisement
Table of Contents
