Table of Contents
Advertisement
the network configuration utilities of the computer. You might also find the MAC addresses on
the Network Devices screen (see
CAUTION:
If you use a wireless device to set up the access list, add your wireless
device to the access list. Otherwise, you are disconnected when you click
the Apply button. To avoid this situation, use a computer with a wired
connection to access the extender.
Before you enable the access list, you must add the MAC addresses of the wireless devices
that you want to grant access to the WiFi network of the extender.
To set up and enable the access list:
1.
On your computer, launch a web browser.
2.
In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.
Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.
4.
Select Advanced > Wireless Settings.
5.
Click the Setup Access List button.
The Wireless Card Access List screen displays.
6.
Click the Add button.
The screen adjusts.
7.
In the Device Name field, type a name for the wireless device.
N300 WiFi Range Extender
View Wired and Wireless Network Devices
Manage the Extender Network
28
on page 35).
Advertisement
Table of Contents
