Table of Contents
Advertisement
4.
Select Maintenance > Set Password.
5.
Select the Enable Password Recovery check box.
6.
Select two security questions and provide answers to them.
7.
Click the Apply button.
Your changes are saved.
To recover your password:
1.
Launch a web browser from a computer or WiFi device that is connected to the network.
In the address field of your browser, enter http://www.mywifiext.net.
A login screen displays.
2.
Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the
extender.
The serial number is on the product label.
3.
Enter the serial number of the extender.
4.
Click the Continue button.
A screen displays requesting the answers to your security questions.
5.
Enter the saved answers to your security questions.
6.
Click the Continue button.
A screen displays your recovered password.
7.
Click the Login again button.
A login screen displays.
8.
With your recovered password, log in to the extender.
Use the Setup Wizard to Connect the Extender to a
Network
The first time that you use a browser to connect to the extender to install it, the NETGEAR
genie installation wizard displays. If you want to use a wizard to set up the extender again,
you can log in to the extender and use the Setup Wizard.
N300 WiFi Range Extender
Manage the Extender Network
20
Advertisement
Table of Contents
