Table of Contents
Advertisement
6.
In the Region list, select your region.
In some locations, you cannot change this setting.
7.
To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
8.
To change the Mbps setting, select a setting from the Mode list.
9.
Click the Apply button.
The new settings take effect and computers and wireless devices on the network are
automatically disconnected.
Change the WiFi Password or Security Level
Your router comes with preset WPA2 or WPA security. The password that you enter to
connect to your network is unique to your router and is on the router label. NETGEAR
recommends that you use the preset security, but you can change the settings. NETGEAR
recommends that you do not disable security.
To change the WPA settings:
1.
On your computer, launch a web browser.
2.
In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.
Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.
4.
Select Setup > Wireless Settings.
N300 WiFi Range Extender
Manage the Extender Network
24
Advertisement
Table of Contents
