Table of Contents
Advertisement
To restore factory settings:
1.
Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks
amber.
Factory
Reset
button
2.
Release the button.
All the LEDs turn off for about three seconds.
The Power LED lights solid amber for about 30 seconds.
The Power LED
The extender returns to its factory settings.
Erase the Extender Settings and Return to Factory Settings
CAUTION:
This process erases any settings that you configured in the extender.
To erase the extender's current settings:
1.
On your computer, launch a web browser.
2.
In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.
Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.
N300 WiFi Range Extender
lights solid green.
Monitor and Maintain the Extender
33
Advertisement
Table of Contents
