American Megatrends 42 Series User Manual page 20

Step 2 Install Memory,
Installing SIMMs
Both Bank 0 and Bank 1 have four SIMM sockets. Use 256 KB x 9, 1 MB x 9, or 4 MB x 9 SIMMs. Use only one type of SIMM
to fill each memory bank.
1. Place the motherboard on an anti-static mat.
2. Firmly push the SIMM into the socket with the component side facing the interior of the motherboard. When properly
inserted, the SIMM will click into place. The following graphic illustrates SIMM installation.
SIMM Types
The graphic below shows the two types of SIMMs.
Continued