Wait For <F1> If Any Error; System Boot Up Num Lock; Weitek Processor; Floppy Drive Seek At Boot - American Megatrends 42 Series User Manual

ADVANCED CMOS SETUP Options,
Continued
Wait For <F1> If Any Error
When disabled, AMIBIOS does not halt after displaying a POST error message and
Press <F1> to continue

System Boot Up Num Lock

Turns off Num Lock when the system is powered so you can use the arrow keys on both the numeric keypad and the keyboard.
AMIBIOS default is Num Lock on. The settings are On or Off.

Weitek Processor

Specifies that a Weitek numeric processor (WTK3167) is configured. The settings are Absent or Present.

Floppy Drive Seek At Boot

The settings are Enabled or Disabled. The default for this option is Disabled to allow a fast boot and to decrease the possibility
of damage to the heads.

System Boot Up Sequence

The settings are C:,A: or A:,C:. AMIBIOS boots from floppy drive A:, and if unsuccessful, boots from hard disk drive C:.

System Boot Up CPU Speed

Sets the speed at which the system boots. The settings are High or Low.