Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty; Sheet Printing Is Selected - Canon imagePROGRAF iPF765 Basic Manual

Roll printing is selected, but sheets are loaded.

Cause
You have attempted to print a test print sheet or
other printer status information on a roll, but no
roll is loaded.
Roll printing is selected, but sheets are loaded.
Roll printing is selected, but sheets are loaded.
Cause
A print job for rolls was received when a sheet
is loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1.
2.
3.
4.
5.
There is remaining The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to change the
roll paper, but be- printing mode, which will change the paper feed timing.
cause it could not Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
be advanced, it
could not be detec-
ted.

Sheet printing is selected.

Sheet printing is selected.
You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet is
loaded.
114
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop print-
ing.
2.
Load a sheet and try printing again.
(See "Loading and Printing on Sheets.")
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.
(See "Removing Sheets.")
2.
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press the Release Lever back and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
Load the new roll.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printed on
the roll, also specify the paper length.
(See "Specifying the Paper Length.")
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK
button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
Cause
Press ▲ or ▼ to select Load Cut Sheet, and then press the OK button. Load the
sheet, and then print.
(See "Loading and Printing on Sheets.")
To print on rolls, follow these steps.
1.
2.
Corrective Action
→User's Guide
Corrective Action
→P.20
→P.12
Corrective Action
→P.15
→User's Guide
→P.9
→P.12
→User's Guide
→User's Guide
Corrective Action
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop
printing.
Load a roll and try printing again.
iPF765
→User's Guide
→User's Guide
Basic Guide