Canon imagePROGRAF iPF765 Basic Manual page 105

iPF765
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Cause
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Control Pan-
el menu was set to 600dpi.
The printer stops when printing a HP-GL/2 job (the carriage stops moving) The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
The printer is analyzing the print job.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
Basic Guide
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Corrective Action
In the Control Panel menu, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Menu Settings.")
→User's Guide
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") →User's Guide
Corrective Action
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.") →User's Guide
105