Handling Paper; Handling Rolls - Canon imagePROGRAF iPF765 Basic Manual

iPF765

Handling Paper

Handling Paper

Handling rolls

Handling rolls
Attaching the Roll Holder to Rolls ................................................................................................................... 9
Loading Rolls in the Printer ........................................................................................................................... 12
Removing the Roll from the Printer ............................................................................................................... 15
Attaching the Roll Holder to Rolls
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-Inch Paper Core
Holder Stopper (Left Side)
2-Inch Paper Core Attachment
•
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause
injury.
Caution
•
When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recommend
wearing clean cloth gloves when handling rolls to protect the printing surface.
Important
•
Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it
may cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed on the
roll.
•
Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems.
•
For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Sizes.")
(See "Types of Paper.")
→User's Guide
Note
•
To view instructions as you attach the Roll Holder, press the Navigate button. (See "Viewing Instructions With the Navi-
gate Button.")
→User's Guide
Basic Guide
Roll Holder (Right Side) Holder Stopper (Left Side)
No Attachment Needed 3-Inch Paper Core Attachment L
→User's Guide
Attaching the Roll Holder to Rolls
Using Rolls with a 3-Inch Paper Core
Roll Holder (Right Side)
3-Inch Paper Core Attachment R
9