Error Messages - Canon imagePROGRAF iPF825 Basic Guide No.2 Basic Manual

Error Messages

Respond to error messages as follows.
Error messages
Check the message and take the appropriate action.
• Before borderless printing, move the blue platen switch.
• Blue platen switch is dirty.
• Borderless printng not possible.
• Borderless printng not possible. Paper stretched or shrank.
• Cannot adjust band.
• Cannot adjust printhead.
• Cannot print as selected. Another roll is in use.
• Cannot print as specifi ed.
• Close Ink Tank Cover
• End of paper feed.
• ERROR Exxx-xxxx (x represents a letter or number)
• Execute printhead cleaning.
• File read error.
• GARO Wxxxx (x represents a number)
• GL2: W0502 The parameter is out of range.
• GL2: W0504 This command is not supported.
• GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
• Hard disk error.
• Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
• Ink insuffi cient.
• Ink tank is empty.
• Insert the maintenance cartridge.
• Insuffi cient paper for job
• Mail box full. Now printing without saving data.
• Mail box nearly full.
• Maintenance cartridge full.
• Maintenance cartridge problem.
• Maximum jobs stored.
• Media take-up unit ready.
• Multi-sensor error
• No ink left.
• No ink tank loaded.
• No Maintenance Cartridge capacity.
• No printhead
• No Roll Unit.
• Not much ink is left.
• Paper cutting failed.
• Paper jam.
• Paper loaded askew.
• Paper size not detected.
• Papr Type Mismatch
• PaprTypeMismatch
• Parts replacement time has passed.
• PHead needs cleaning.
• Prepare for maint cart replacement.
• Prepare for parts replacement.
32