If Paper is Soiled
•
Do not touch the Linear Scale (a), Carriage Shaft (b),
or Ink Tube Stabilizer (c).
Avoid cleaning where the Carriage is retracted, in
position (d) or (e). This may damage the printer.
•
If the Cleaning Brush is dirty, rinse it in water.
3
Using a damp cloth that you have wrung out completely,
wipe away dirt or paper dust (debris from cutting) inside
the Top Cover .
Wipe away any ink residue and paper dust (debris from
cutting) on the Top Cover Roller (a), all over the Platen
(b), the Paper Retainer (c), the Borderless Printing Ink
Grooves (d), the Ejection Guide (e), the blue Switch (f),
the section around the right-side Borderless Printing Ink
Grooves (g), and so on.
•
Do not use a dry cloth to wipe inside the Top Cover . This may create a static charge, which may attract
dust and affect the printing quality.
•
Do not touch the clear sheet on the side of the Top Cover Roller . This may damage the roller.
4
Close the Top Cover .
24
a
c
b
d
g
a
e
c
d
f
b
e