ANN-BUS Devices
Mounting/Installation
The GFANN-RLY relay module can be mounted inside the FACP main circuit board chassis or inside the ROME Series enclosure. Refer
to the GFANN-RLY Installation Document #53378 for instructions on chassis mounting or to the ROME Series Installation Document
#53530 for mounting in the separate backbox.
FACP Chassis Installation
mounting hooks through
ROME Series Installation
using ANN-MBRLY mounting bracket
GFANN-RLY on
ANN-MBRLY
mounting bracket
GF505 & GF510 Manual — P/N 53164:B5 6/12/2018
mounting holes
mounting slots
mounting holes
mounting holes
Figure 2.24 GFANN-RLY Mounting Options
FACP Backbox Installation
using ANN-MBRLY mounting bracket
grounding wire
mounting holes
ANN-MBRLY
mounting bracket
GFANN-RLY
mounting holes
Installation
41