Section 1: Product Description; Product Features - Honeywell GF505 Manual

Fire alarm control panels

page of 124

/ 124
Contents
Table of Contents
Bookmarks

Table of Contents

The GF505 is a five zone FACP (Fire Alarm Control Panel) and the GF510 is a ten zone FACP. The information in this manual refers to

both the GF505 and GF510 unless otherwise specified. The combination control and digital communicator panels provide reliable fire

signaling protection for small to medium sized commercial, industrial and institutional buildings. The FACP is compatible with System

Sensor's i

detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the

need for cleaning and a supervisory 'freeze' signal when the ambient temperature falls below the detector rating of approximately 45

(refer to System Sensor i

devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other nor-

mally-open contact devices. Refer to the Gamewell-FCI Device Compatibility Document for a complete listing of compatible devices.

Outputs include four NACs (Notification Appliance Circuits), three programmable Form-C relays (factory programmed for Alarm,

Trouble and Supervisory) and 24 VDC special application resettable and nonresettable power outputs. The FACP supervises all wiring,

AC voltage, battery level and telephone line integrity. Available accessories include local and remote upload/download software, remote

annunciators and reverse polarity/city box transmitter.

The integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone net-

work. It also allows remote programming or interrogation of the control panel using the PS-Tools Upload/Download utility via the public

switched telephone network. Local programming interrogation is also possible using the PS-Tools and the USB port on the FACP. Any

personal computer with Windows

Terminal. This allows download of the entire program or upload of the entire program, history file, walktest data and current status.

Activation of a compatible smoke detector or any normally-open fire alarm initiating device will activate audible and visual signaling

devices, illuminate an indicating LED, display alarm information on the panel's LCD, sound the piezo sounder at the FACP, activate the

FACP alarm relay and operate an optional module used to notify a remote station or initiate an auxiliary control function.

The following versions of the GF505 and GF510 are available:

FACP Version

GF505

GF510

NOTE: Unless otherwise specified, the information in this manual applies to all versions of the panels.

1.1 Product Features

•

Built-in DACT (Digital Alarm Communicator/Transmitter)

•

Style B (Class B) IDC (Initiating Device Circuit)

 GF505 - five programmable IDCs

 GF510 - ten programmable IDCs

•

Four Style Y (Class B) NAC (Notification Appliance Circuit) - special application power

•

Three programmable Form-C relays

•

Built-in Programmer

•

Touchtone/Rotary dialing

•

Programmable Make/Break Ratio

•

Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet

•

ANN-BUS for connection to optional:

 GFANN-80 Remote LCD Annunciator

 GFANN-RLY Relay Module

 GFANN-LED Annunciator Module

•

80-character LCD display (backlit)

•

Real-time clock/calendar with daylight savings time control

•

History log with 256 event storage

•

Control Buttons

 ACK (Acknowledge)

 Alarm Silence

 System Reset/Lamp Test

 Drill

•

LED Indicators

 Fire Alarm

 Supervisory

 Trouble

 AC Power

 Alarm Silence

 Primary and Secondary Phone Line Active LEDs

•

Piezo sounder for alarm, trouble and supervisory

•

24 volt operation