Table of Contents
Advertisement
QUICK START GUIDE
1.
Press and Hold
for 10 seconds
0 1
a.
will appear in the display
b. Remove access shield
c. Remove all ice in bin
d. Remove any ice protruding from the ice dispenser
tube.
2.
Insert the end of the cleaning tube into the ice
dispenser; slowly pour in approximately 1 quart of
hot (min. 100º F) potable water. This will melt ice
inside the dispenser tube. It is normal for some water
to flow from the ice dispenser tube and exit from the
vent tube while pouring. Omit this step if no ice is in
the ice dispenser tube.
Cleaning Tube
and Funnel
3.
Press and release
a.
will appear in the display
02
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of
potable water.
4.
Wait until
appears in the display
03
a. Using the funnel and cleaning tube, slowly pour
3⁄4 of the cleaning solution into the dispenser
tube. Air and some water will exit the vent tube.
Remove cleaning tube. (Optional - for deeper
cleaning, allow solution to soak for 60 minutes)
b.
Press and release
. 04
5
will appear in the display
a. The machine will circulate the solution, cleaning
and sanitizing the internal components, for
approximately 20 minutes.
b. While the machine is circulating the cleaning
solution, use 1⁄2 of the remaining cleaning solution
and a sponge to wipe down the inside of the ice bin
and scoop. Rinse with clean potable water.
u-line.com
Cl
Vent Tube
Ice
Dispenser
Tube
USER GUIDE
6.
When
appears in the display, 3 soft tones will
05
sound, indicating the cleaning phase is complete
a. Remove and discard water filter if applicable by
rotating 1⁄4 turn counterclockwise.
b. Use the remaining cleaning solution to wipe the
manifold and surrounding area. Rinse with clean
potable water.
Manifold
(Filter Models Only)
c. Using the hose and funnel, slowly pour 1.5 quarts
(48 oz.) of clean potable water into the ice
dispenser tube. Air and some water will exit the
vent tube.
d. Install new water filter. Press and rotate 1⁄4 turn
clockwise
e. Press and release
7.
will appear in the display
06
a. Reinstall shield and close door.
b. The machine will circulate water and perform
a series of final rinses for approximately 15
minutes.
c. The unit will resume making ice - indicated by 3
soft tones and
Discard first 10 minutes of ice production.
32
Cleaning
u-line.com
ICE
scrolling in the display.
Advertisement
Table of Contents
