U-Line BrightShield HRE524 Quick Start Manual page 14

QUICK START GUIDE
TO REVERSE THE DOOR
Remove arrow clips:
1. With a puddy knife or other flat tool, gently pry each
arrow clip from hinge mounting holes.
TO REVERSE THE DOOR
Remove grille:
2. Set aside arrow clips to be reused on the opposite
side.
Remove the grille (see GRILLE INSTALLATION section
of this guide).
Remove top hinge and door:
1. Hold door to keep it from falling.
2. Remove top hinge from cabinet by removing three
screws. Set aside and save for possible future use.
Remove top hinge and door:
1. Hold door to keep it from falling.
2. Remove top hinge from cabinet using a Torx T-25
screwdriver to remove three screws.
USER GUIDE
USER GUIDE
Remove bottom hinge:
u-line.com
1. Remove bottom hinge from cabinet.
u-line.com
3.
4.
2. Remove corresponding screws on opposite side of
Remove bottom hinge:
1.
Install bottom hinge:
Install two or three screws, depending on model. Replace
nuts if used.
2.
Prepare door for reinstallation:
1. Remove gasket. This will reveal mounting holes for the
Install bottom hinge:
Install two or three screws, depending on model. Replace
nuts if used.
14
Door Adjustments
Door Adjustments 1
Door Adjustments
Remove door by tilting forward and lifting door off
bottom hinge. Retain shoulder washers; they will be
reused.
Insert arrow clips into holes.
cabinet. On some models there may be a nut behind
one or both screws on either side. Remove bottom hinge from cabinet using a T-25 TORX
screw driver to remove three screws.
Remove corresponding screws on opposite side of
cabinet. On some models there may be a nut behind
one or both screws on either side.
magnet assembly
4.
u-line.com
In
1.
2.
3.
4.
Al
Ali
AD
In
In