Removal Of The D.h.w. Temperature Probe Ntc - Biasi RINNOVA ADAPTIVE M300V.2025 SM Service Manual

Warning: to lubricate the O-ring gaskets exclusively
use a silicone base grease compatible to be in con-
tact with foods and approved by the local water Au-
thorities .
Figure 15 .4
15 .5 Removal of the D .H .W . temperature probe
NTC
Warning: isolate the boiler from the mains electrici-
ty supply before removing any covering or compo-
nent .
1 Remove the front panel of the case and lower the control
panel.
2 Empty the D.H.W. circuit of the boiler.
3 Remove the electric connector "G" (Figure 15.5)
4 Unscrew the NTC probe "C".
5 Reassemble the NTC probe carrying out the removal opera-
tions in reverse order.
Warning: to lubricate the O-ring gaskets exclusively
use a silicone base grease compatible to be in con-
tact with foods and approved by the local water Au-
thorities .
- 40 -
TEMPERATURE PROBE
B
F
Figure 15 .5
C
G