1-1-5. Rear Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off the tape (1).
3. Remove the screw (2), four screws (3) and five screws (4).
4. Remove two claws, then remove the rear panel (5).
5. Remove two screws (6), them remove the fan (7).
Note:
• After replacing, attach the tape (1) to its original position.
1-1-6. Fan
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off the tape (1).
3. Remove the connector (2).
4. Remove two screws (3), then remove the fan (4).
Note:
• After replacing, attach the tape (1) to its original position.
Claw
Rear panel (5)
Tape (1)
Fig. 2-1-5
Screw (2)
Screws (3)
Screws (4)
Fan (7)
Hexagonal nut
Hexagonal nut
Connector (2)
Fig. 2-1-6
Screws (6)
Claw
Tape (1)
Fan (4)
Screws (3)