1-1-4. Rear Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel of the tape (1).
3. Remove two screws (2) and seven screws (3).
4. Remove two claws, then remove the rear panel (4).
5. Remove two screws (5), then remove the fan (6).
Note:
• After replacing, attach the tape (1) to its original position.
1-1-5. Fan
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off the tape (1).
3. Disconnect the connector (2).
4. Remove two screws (3), then remove the fan (4).
Note:
• After replacing, attach the tape (1) to its original position.
Claw
Rear panel (4)
Tape (1)
Fig. 2-1-4
Tape (1)
Screws (2)
Screws (3)
Screws (5)
Claw
Fan (6)
Fan (4)
Hexagonal
nuts
Fig. 2-1-5
Screws (3)
Connector (2)