Fan; Rear Panel - Toshiba D-R2SU Service Manual

1-1-6. Fan

1. Peel off the tape (1).
2. Disconnnect the connector (2).
3. Remove four screws (3) and the fan (4).
Note:
• After replacing the fan (4), attatch the tape (1) as it was.

1-1-7. Rear Panel

1. Remove twelve screws (1), then remove the rear panel (2).
Wire (5)
Pass the wire (5)
underneath the
folded part.
Acrylic board
Tape (1)
Fig. 2-1-6
Rear panel (2)
Fig. 2-1-7
Wire (5)
Fan (4)
Screws (3)
Connector (2)
Screws (1)