1-1-3. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1).
3. Disconnect two connectors (2) and two flexible cables (3).
4. Remove two screws (4) and four claws, then remove the front panel (5).
Note:
• After replacing, attach the tape (1) to its original position.
Claw
Claws
Tapes (1)
Connector (2)
Flexible
cables (3)
Screws (4)
Fig. 2-1-3
Claw
Front panel (5)
Connector (2)