1-1-5. Rear Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the screw (1), screw (2), and five screws (3).
3. Remove the bushing of the power plug (4).
4. Remove two claws, then remove the rear panel (5).
5. Remove two screws (6), then remove the fan (7).
1-1-6. Fan
1. Remove the top cover. (Refer to item 1-1-1.)
2. Disconnect the connector (1).
3. Remove the cable tie (2).
4. Remove two screws (3), then remove the fan (4).
Screw (1)
Claw
Rear panel (5)
Hexagonal nuts
Connector (1)
Cable tie (2)
Screws (3)
Screw (2)
Bushing
Fan (7)
Fig. 2-1-5
Fan (4)
Fig. 2-1-6
Power plug (4)
Screws (6)
Claw
Screws (3)