Finding Help & Support
Display (Monitor)
Symptom
✎
If you encounter display problems, refer to the documentation that came with your monitor
and to the common causes and solutions listed in this table.
Screen is blank, and monitor
power light is not lit.
Screen is blank.
5–10
Problem
Monitor power cable is not
connected to the monitor or
to the wall outlet.
Monitor is not turned on.
Monitor connector cable is
not properly connected to the
back of the computer.
Screen saver is enabled.
Computer is in Stand By
mode.
Solution
Reconnect the power plug on
the back of the monitor and
on the wall outlet.
Press the Power button on
the front of the monitor.
Inspect the monitor video
connector for bent pins. If no
pins are bent, reconnect the
monitor connector cable on
the back of the computer.
Press any key or move the
mouse to make the screen
display visible again.
Press the Power button to
resume from Stand By mode.
Getting Started