HP Compaq GT7720 Hardware Reference Manual page 32

Hp compaq gt7720: reference guide

Hide thumbs Also See for Compaq GT7720:

Table of Contents

To use the HP Quick Release with a VESA-configured thin client:

Using four 10 mm screws included in the mounting device kit, attach one side of the HP Quick

Release to the thin client as shown in the following illustration.

Figure C-2

Using four screws included in the mounting device kit, attach the other side of the HP Quick Release

to the device to which you will mount the thin client. Make sure the release lever points upward.

Figure C-3

Appendix C Mounting the Thin Client

Connecting the HP Quick Release to the thin client

Connecting the HP Quick Release to another device

ENWW

Table of Contents

Gt7725 Ng814aa