External Drives - HP Compaq GT7720 Hardware Reference Manual

You need the following to complete this procedure:
●
PCI-Express card
●
Phillips head screwdriver
WARNING!
power cord is disconnected from the electrical outlet.
CAUTION:
To remove the PCI-Express card:
1. Locate the PCI-Express card installed in the expansion module.
2. Grasp the PCI-Express card carefully and pull it straight out of the expansion socket.
NOTE:
To install the PCI-Express card:
Hold the expansion card next to the expansion socket in the expansion module. Press the card
▲
straight into the expansion socket.
NOTE:
slot.
Figure 2-11

External Drives

Various external USB drives are available as options for these thin clients. For more information about
these drives, visit
instructions that accompany the option.
For more information about available options, visit the HP Web
your specific thin client model.
ENWW
Before removing the side access panel, ensure that the thin client is turned off and the
Do not remove the inner metal side cover when performing this procedure.
Store the PCI-Express card carefully to prevent damage.
Press firmly on the card so that the whole connector seats properly in the expansion card
Installing the PCI-Express graphics card
http://www.hp.com and search for your specific thin client model, or refer to the
sitehttp://www.hp.com
Installing Thin Client Options
and search for
21