10. Apply a normal signal and confirm that the image is normal and a
good gray scale
11. If correction is needed perform minor touch-up method.
12.5. Deflection adjustments
To reset deflection adjustments
To reset deflection adjustments to factory adjusted default, enter to service mode (with red CHK
displayed), press POWER button on remote to display the service menu, then press and hold
RECALL button for at least three seconds, a reset messagewill appear in the image.
Use this feature when deflection adjustment gets off adjustment to the point that it cannot be
adjusted back easily.
12.5.1.
H-Center adjustment
PREPARATION
1. Apply a crosshatch pattern.
2. Normalize the picture settings.
PROCEDURE
1. Apply a pattern that permits to center the picture.
Horizontal Center Adjustment
28