Specifications - HP Compaq dc7600 MT Technical Reference Manual

2.5 Specifications

This section includes the environmental, electrical, and physical specifications for the systems
covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications
are subject to change without notice.
Environmental Specifications (Factory Configuration)
Parameter
Ambient Air Temperature
Shock (w/o damage)
Vibration
Humidity
Maximum Altitude
NOTE:
[1]
[2]
Parameter
Input Line Voltage:
Nominal:
Maximum:
Input Line Frequency Range:
Nominal:
Maximum:
Power Supply:
Maximum Continuous Power:
USDT
ST or SFF
MT
CMT
Maximum Line Current Draw:
USDT
SF or SFF
MT
CMT
.
Technical Reference Guide
Operating
50 o to 95 o F (10
rate of change < 10°C/Hr)
5 Gs [1]
2
0.000215 G
10-90% Rh @ 28
wet bulb temperature
10,000 ft (3048 m) [2]
Peak input acceleration during an 11 ms half-sine shock pulse.
Maximum rate of change: 1500 ft/min.
Table 2-8
Electrical Specifications
100–240 VAC
4 A @ 100 VAC
5 A @ 100 VAC
5.4 A @ 100 VAC
6 A @ 100 VAC
Table 2-7
o to 35 o C, max. -24 o to 140
rate of change < 20°C/Hr )
/Hz, 10-300 Hz 0.0005 G
o
C max. 5-95% Rh @ 38.7
U.S. International
100–240 VAC
90–264 VAC 90–264 VAC
50–60 Hz
47–63 Hz
200 watts
240 watts
300 watts
365 watts
2 A @ 200 VAC
2.5 A @ 200 VAC
2.7 A @ 200 VAC
3.0 A @ 200 VAC
www.hp.com
System Overview
Non-operating
o F (-30 o to 60 o C, max.
20 Gs [1]
2
/Hz, 10-500 Hz
o
C max.
wet bulb temperature
30,000 ft (9144 m) [2]
50–60 Hz
47–63 Hz
200 watts
240 watts
300 watts
365 watts
2-25