Installing The Baffle - Toro 78463 Operator's Manual

11

Installing the Baffle

Parts needed for this procedure:
1 Baffle
1 Carriage bolt (5/16 x 7/8 inch)
1 Flange nut (5/16 inch)
2 Carriage bolt (3/8 x 7/8 inch)
2 Flange nut (3/8 inch)
Procedure
1. Remove the 2 existing flange nuts (3/8 inch) and
2 carriage bolts (3/8 x 7/8 inch) from the mower
deck (Figure 23).
Note:
Retain the hardware that you removed
during this procedure so that it is available for
changeover.
Figure 23
1. Flange nut (3/8 inch)
2. Install the baffle using the carriage bolt (5/16 x
7/8 inch), flange nut (5/16 inch), 2 carriage bolts
(3/8 x 7/8 inch), and 2 flange nuts (3/8 inch) as
shown in Figure
2. Carriage bolt (3/8 x 7/8
inch)
24.
1. Flange nut (3/8 inch)
2. Carriage bolt (3/8 x 7/8
inch)
3. Baffle
g038113
18
Figure 24
4. Flange nut (5/16 inch)
5. Carriage bolt (5/16 x 7/8
inch)
g341587