Setup - Toro 78463 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
Description
No parts required
Shoulder bolt
Wave washer
Locknut (1/2 inch)
Weight
Carriage bolt (3/8 x 1 inch)
Flange nut (3/8 inch)
Lower support
Upper support
Left, upper bracket
Right, upper bracket
Backer plate
Carriage bolt (5/16 x 2-1/4 inches)
Flange nut (5/16 inch)
Plain washer
Hex-head bolt (5/16 x 3-1/4 inches)
Flange-head bolt (3/8 x 1-1/4 inches)
Locknut (3/8 inch)
Flange-head bolt (5/16 x 1 inch)
Bag support
Lock-pin assembly
Bags
Hitch cover
No parts required
CE Kit
Blower pulley
Pulley mount
Locknut (3/8 inch)
Belt-cover bracket
Speed nut
Carriage bolt (1/4 x 3/4 inch)
Locknut (1/4 inch)
Baffle
Carriage bolt (5/16 x 7/8 inch)
Flange nut (5/16 inch)
Carriage bolt (3/8 x 7/8 inch)
Flange nut (3/8 inch)
Qty.
–
Prepare the machine.
2
2 Install the ROPS pivot shoulder bolt.
2
2
4 Install the weights.
4
2
1
1
1
2
4
Install the bagger supports and brackets.
8
4
4
2
4
2
1
Install the bagger frame.
2
2 Install the bags.
1 Install the hitch cover.
Remove the existing belt cover, bracket,
–
and discharge chute.
Install the CE Kit (for CE machines
1
only).
1
1
3
1 Install the blower-pulley assembly.
1
2
2
1
1
1 Install the baffle.
2
2
7
Use