1Type 1 Battery Holder - HP Compaq dc5000 MT Reference Manual

Removal and Replacement Procedures— Microtower (µT) Chassis
6.15.1 Type 1 Battery Holder
1. Lift the battery out of its holder.
2. Slide the replacement battery into position, positive side up.
3. The battery holder automatically secures the battery in the proper position.
4. Replace the computer cover or access panel
5. Plug in the computer and turn on power to the computer.
6. Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
6–28
(Section 6.3, "Access
360201-002
Panel").
Service Reference Guide, dc5000