Front I/O Devices - HP Compaq dc5000 MT Reference Manual

Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.9

Front I/O Devices

1. Prepare the computer for disassembly
2. Disconnect the two I/O device cables from the system board: the front USB cable pair and
the front audio cable.
3. Remove the power supply from the chassis
4. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis 1, then pull the device into the chassis 2 to free it from its mount.
To install the housing assembly, reverse the removal procedures.
7–20
(Section 7.1, "Preparation for
(Section 7.16, "Power
360201-002
Disassembly").
Supply").
Service Reference Guide, dc5000