6.4 Front Bezel
1. Prepare the computer for disassembly
2. Remove the access panel
3. To remove the front bezel, press in on the two bottom tabs on the left side of the bezel 1 so
that they release from the chassis. Then press in on the upper tab on the left side of the bezel
2 so that it releases from the chassis. The bezel will rotate out slightly from left to right.
Ä
CAUTION: Do not over-rotate or try to pull the bezel off at this point, otherwise you may break the
remaining hooks on the inside of the bezel.
Service Reference Guide, dc5000
Removal and Replacement Procedures— Microtower (µT) Chassis
(Section 6.1, "Preparation for
(Section 6.3, "Access
Panel").
360201-002
Disassembly").
6–5